Plate Beveler
Manufacturer: STEELMAX DBM12
| Specifications | |
| Part Number | SM-DBM12 |
| Motor Power | 400W, 7.5 rpm |
| Plate Thickness | 0.12″-‐1.38″ (3mm-‐35mm) for 22.5⁰, 30⁰ & 37.5⁰ bevel angles |
| 0.12″-‐0.87″ (3mm-‐22mm) for 45⁰ & 50⁰ bevel angles | |
| Miter | 4.7″ W X 3.9″ Right @ 60° |
| Max Bevel Width | 12mm (0.5″) |
| Cutting Speed | 6 ft/min (1.8m/m) |
| Bevel Range | 22.5⁰ - 50⁰ (See accessories below for angle attachment) |
| Dimensions | Dimensions |
| Weight | 66 lbs (30kg) |
| H | α | C≥ |
| 3-8 mm (0.12″-0.32″) | 22.5⁰ – 50⁰ | 0mm (0″) |
| 10mm (0.4″) | 50⁰ | 2mm (0.08″) |
| 45⁰ | 1.5mm (0.06″) | |
| 37.5⁰ | 0.5mm (0.02″) | |
| 30⁰ | 0mm (0″) | |
| 22.5⁰ | 0mm (0″) | |
| 12mm (0.47″) | 50⁰ | 4mm (0.16″) |
| 45⁰ | 3.5mm (0.14″) | |
| 37.5⁰ | 2.5mm (0.1″) | |
| 30⁰ | 1.5mm (0.06″) | |
| 22.5⁰ | 1mm (0.04″) | |
| 15mm (0.6″) | 50⁰ | 7mm (0.28″) |
| 45⁰ | 6.5mm (0.26″) | |
| 37.5⁰ | 5.5mm (0.22″) | |
| 30⁰ | 4.5mm (0.18″) | |
| 22.5⁰ | 4mm (0.16″) | |
| 20mm (0.8″) | 50⁰ | 12mm (0.47″) |
| 45⁰ | 11.5mm (0.45″) | |
| 37.5⁰ | 10.5mm (0.41″) | |
| 30⁰ | 9.5mm (0.37″) | |
| 22.5⁰ | 9mm (0.35″) | |
| 22mm (0.87″) | 50⁰ | 12mm (0.47″) |
| 45⁰ | 11.5mm (0.45″) | |
| 37.5⁰ | 10.5mm (0.41″) | |
| 30⁰ | 9.5mm (0.37″) | |
| 22.5⁰ | 9mm (0.35″) | |
| 22mm (0.87″) | 50⁰ | 14mm (0.55″) |
| 45⁰ | 13.5mm (0.53″) | |
| 37.5⁰ | 12.5mm (0.49″) | |
| 30⁰ | 11.5mm (0.45″) | |
| 22.5⁰ | 11mm (0.43″) | |
| 25mm (1.0″) | 37.5⁰ | 15.5mm (0.61″) |
| 30⁰ | 14.5mm (0.57″) | |
| 22.5⁰ | 14mm (0.55″) | |
| 30mm (1.18″) | 37.5⁰ | 20.5mm (0.81″) |
| 30⁰ | 19.5mm (0.77″) | |
| 22.5⁰ | 19mm (0.75″) | |
| 35mm (1.38″) | 37.5⁰ | 25.5mm (1.00″) |
| 30⁰ | 24.5mm (0.97″) | |
| 22.5⁰ | 24mm (0.95″) |
