CNC Lathes 2 Axis
| Swing Diameter | S.A.E | Metric |
| Over Front Apron | 31.75″ | 806 mm |
| Over Cross Slide | 20.75″ | 527 mm |
| Over Tailstock | 23.0″ | 584 mm |
| Capacities | S.A.E | Metric |
| Chuck Size | 10.0″ | 254 mm |
| Max Cutting Diameter (varies with turret) | 21.0″ | 533 mm |
| Max Cutting Length (without workholding) | 26.0″ | 660 mm |
| Bar Capacity | 3.0″ | 76 mm |
| Between Centers | 30″ | 762 mm |
| Travel & Feedrates | S.A.E | Metric |
| X Axis | 12.5″ | 318 mm |
| Z Axis | 26″ | 660 mm |
| Rapids on X | 945 in/min | 24.0 m/min |
| Rapids on Z | 945 in/min | 24.0 m/min |
| Max Thrust X | 4100 lb | 18238 N |
| Max Thrust Z | 5100 lb | 22686 N |
| Spindle | S.A.E | Metric |
| Max Rating | 30 hp | 22.4 kW |
| Max Speed | 3400 rpm | 3400 rpm |
| Max Torque | 300 ft-lb @ 500 rpm | 407 Nm @ 500 rpm |
| Spindle Nose | A2-6 | A2-6 |
| Max Torque w/opt Gearbox | 1000 ft-lb @ 150 rpm | 1356 Nm @ 150 rpm |
| Spindle Bore ø | 3.50 “ | 88.9 mm |
| Turret | S.A.E | Metric |
| Number of Tools | 12 Stations | 12 Stations |
| OD vs ID Tools | Any Combination (will vary with turret style) | Any Combination (will vary with turret style) |
| Boring Bar Rear Clearance (from back of turret ) | 4.0 “ | 102 mm |
| General | S.A.E | Metric |
| Air Required | 4 scfm, 100 psi | 113 L/min, 6.9 bar |
| Coolant Capacity | 55 gal | 208 L |
